HDCP Error ? Fix and solution to any HDCP issue or problem Forum Index HDCP Error ? Fix and solution to any HDCP issue or problem
HDCP 2.2 <> HDCP 1.4 - HDMI to Component, HDMI to RGBHV, HDMI to DVI-D, HDMI to HDMI up to 4K60 4:4:4 600MHz 18Gbps.
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

HDFURY FLASHING PROCEDURES FOR MAC AND WINDOWS USERS

 
This forum is locked: you cannot post, reply to, or edit topics.   This topic is locked: you cannot edit posts or make replies.    HDCP Error ? Fix and solution to any HDCP issue or problem Forum Index -> HDfury Downloads
View previous topic :: View next topic  
Author Message
CHUN



Joined: 01 Jan 1970
Posts: 3664

PostPosted: Mon Dec 07, 2015 3:30 pm    Post subject: HDFURY FLASHING PROCEDURES FOR MAC AND WINDOWS USERS Reply with quote

These directions are for both windows and mac users.


If you use a mac and need to flash or update a hdfury device. You will need to use either bootcamp and install windows
https://www.apple.com/support/bootcamp/

Or install Parallels and windows within OS X.

http://www.parallels.com/


Once you have windows installed the procedure is the same as with windows users.

These instructions are for updating or using apps with the Dr HDMI, Splitter 4K, Splitter 4K PRO, 4K60 Integral, 3Dfury, HDfury 4S etc.
All the below items need to be connected to the computer via usb after the Silabs drivers are installed.

Make sure to install the right silabs driver based on your Windows version and USB port if you haven't yet done so.

Silabs Driver 4.0.0 for XP/VISTA/WIN7/WIN8/WIN10
Silabs Driver 4.0.0 - ZIP - 9.18 Mo
USB2.0: WIN XP / VISTA / WIN7 / WIN8 / WIN10
USB3.0: WIN10

Silabs Driver 3.9.2 for XP/VISTA/WIN7/WIN8
Silabs Driver 3.9.2 - ZIP - 1.65 Mo
USB2.0: WIN XP / VISTA / WIN7 / WIN8
USB3.0: WIN XP / VISTA / WIN7 / WIN8


Directions for Dr HDMI

1) Step 1- download and install the right silabs driver based on Windows version and USB port you plan to use.

2) step 2- download and run the exe for edid manager here.
(Right click and run as admin)
http://www.hdfury.com/tools/Dr.HDMI_v1.0.zip


Directions for the Splitter 4K

1) Step 1- download and install the right silabs driver based on Windows version and USB port you plan to use.

2)Step 2- Download and run the exe for the Manual or Force EDID here
(Right click and run as admin)
http://www.hdfury.com/tools/4K_splitter_EDID_Utility.zip

3)Step 3-Download and run the exe for the firmware update from here
(Right click and run as admin)
http://www.hdfury.com/tools/4K_splitter_fw1_13.zip

Original firmware that shipped on the splitter 4k is available here
http://www.hdfury.com/tools/4K_splitter_fw1_1.zip

Directions for the Splitter 4K Pro

1) Step 1- download and install the right silabs driver based on Windows version and USB port you plan to use.

2)Step 2- Download and run the exe for the Manual or Force EDID here
(Right click and run as admin)
http://www.hdfury.com/tools/4K_splitter_PRO_EDID_Utility.zip

3)Step 3-Download and run the exe for the firmware update from here
(Right click and run as admin)

no update needed yet

Original firmware that shipped on the splitter 4k is available here
http://www.hdfury.com/tools/4K_splitter_pro_original_1.2.zip

Directions for the Integral

1) Step 1- download and install the right silabs driver based on Windows version and USB port you plan to use.

2) Step 2- download and run the TWO exe for the firmware update from here
(Right click and run as admin)
http://www.hdfury.com/tools/Integral_055030.zip

3) Step 3- download and run the GUI control app from here
(Right click and run as admin)
http://www.hdfury.com/tools/4K_Integral_GUI_v1.10.zip

Directions for the 3Dfury
1) Step 1- download and install the right silabs driver based on Windows version and USB port you plan to use.

2) Step 2- download and run the TWO exe for the firmware update from here
(Right click and run as admin)

http://www.hdfury.com/tools/3Dfury_Final_1_21.zip

Directions for the HDfury 4s

1) Step 1- download and install the right silabs driver based on Windows version and USB port you plan to use.

2) Step 2- download and install the desired firmware
exe from here make sure to run TWO exe (Right click and run as admin)
http://www.hdfury.com/tools/Furyscaler_v1.6_Final.zip
or the special 1080i forced output firmware from here
http://www.hdfury.com/tools/FuryScaler_1080iforce.zip

3) Step 3- Download and run the exe for the GUI scaling app from here
http://www.hdfury.com/tools/Scaler_GUI_v1.1.zip
Back to top
View user's profile Send private message
Display posts from previous:   
This forum is locked: you cannot post, reply to, or edit topics.   This topic is locked: you cannot edit posts or make replies.    HDCP Error ? Fix and solution to any HDCP issue or problem Forum Index -> HDfury Downloads All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum