| View previous topic :: View next topic |
| Author |
Message |
hjhjr
Joined: 01 Jan 1970
Posts: 0
|
 Posted: Wed Nov 17, 2010 4:05 am Post subject: HD FURY2 /Yamaha rxv667/ poor video |
 |
|
I have a HD Fury II worked fine till I added a Yamaha rxv 667 receiver. The video after it passes through the 667 is not the same as direct connect. The brightness is down and the colors are way off. This is in HDMI pass through when receiver is off. Same problem with video when the 667 is on. Hooked a lcd HD tv to the output of the 667 the picture on the lcd tv is fine. Do you have any suggestions how to solve this problem. The same thing happens if connected to HDMI from PS3 or Dishnet work receiver.
Signal Flow.
Sources -> HDMI cables -> Yamaha Receiver -> HDMI cable -> HDfury2 ->VGA to RGBHV to Extron system 10 switcher RGBHV out to NEC XG 110 projector. Running 1080i resolution. HD FURY 2 set to RGB using external power supply that came with hd fury
I also tried using a composite video input on the Yamaha up scaled to 720P same video problem
Thanks
Hilton |
|
| Back to top |
|
 |
HKmod
Joined: 01 Jan 1970
Posts: 0
|
| Posted: Fri Nov 19, 2010 3:56 pm Post subject: |
|
|
Hi There,
What firmware are you running on the Yamaha, did you check for any update for it ? |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
